Halloween Props, Animations, Special Effects, Decorations, and High End Prop Assessories

DC Currently has the following items for sale:
Sale valid 5/16/2009 thru 5/31/2009

(last updated 5/22/2009)

	DC Prop Builders Handbook (Volume 1) The DC Prop Builders Handbook is 135 pages of highly detailed prop building instructions, including tons of pictures and diagrams to aid you in the construction of 22 of our prop designs. The designs included in this book are: The Skeletal Organist, Pipe Organ, Stump Jumper, Rocking Chair, two Coffins, Ghost Heads, Pneumatic lifter, Pneumatic Extender, and many more. The book also has a section on basic pneumatics to guide you on your way to create your own (pneumatically driven) Devious Concoctions. Price $~~40.00~~ Sale Price $33.00
	DC Prop Builders Handbook (Volume 2) The Second DC Prop Builders Handbook is the newest addition to the DC Prop Builders Handbook series featuring 137 pages of extremely descriptive instructions to create yet another 10 of our unique designs. These designs include the following: Heavy Duty Lifter, Pneumatic Extender (scissor lift/extender), Drop Panels, Un-Dead Coffin (and erector mechanism), Thrashing Corpse, Thrashing Doors, The Mourner, Lightning Window, Air Cannons, & Pneumatic Web Shooter. The second edition was been in the makings for almost two years, so no expense has been spared in detailing every step, as well as the addition of a multitude of diagrams for every drilling pattern and questionable construction step. The second book also has far more pictures added (average of 2 per page) with much higher resolution prints. So the building process should be easy to follow even though the props are slightly more difficult. The book also has an in depth introduction to computer control and pneumatics, so not only will you have the instructions to build the prop, but the knowledge of it's internal workings and a means of control. Price $~~40.0~~0 Sale Price $33.00
	DC Prop Book Bundle Get Both DC Prop Book volumes 1 & 2 at an additional savings. Price $~~75.00~~ Sale Price $62.50 Canada Residents Please use "buy now" below:
	DC 2008/2007 Haunt Video (DVD) The 2008 video features 38 minutes of all of our newest concoctions, with additional control system and daylight/behind the scenes footage. The 2007 video features 28 minutes of footage from the Award Winning 2007 DC Cemetery. All videos are professionally edited and include haunt footage, haunt footage with actual audio and behind the scenes shots of the cemetery and individual props. The video is composed on one high quality DVD, and are great for a mid year halloween fix. Price $~~18.00~~ Sale Price $12.00
	DC 2005/2006 Haunt Video with bonus footage The 2005/2006 video compelation features 90 minutes of all of our newest concoctions in the 2006 and 2005 seasons as well as a bunch of behind the scenes footage and news coverage. The video is professionally edited and includes haunt footage, haunt footage with actual audio and behind the scenes shots of the cemetery and individual props. The video is composed on one high quality DVD, and are great for a mid year halloween fix. Price $~~12.00~~ Sale Price $8.00
	DC Heavy Lifter The DC Heavy Lifter is a professional built 4 bar lifter that lifts any prop (up to 50lbs safely) 36" from a starting point of 12" up to 48" (lifter platform height). The lifter includes a mounting platform for easy mounting of just about any prop (custom mounting brackets available upon request) that remains parallel to the ground during the entire travel (lift and descent) (ie your prop will only move up and slightly towards the vertical beams of the lifter). The heavy lifter is perfect for use behind larger tombstones or scenic items with heavier props such as a full skeleton. Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings) Kit includes everything needed to operate and control and ships ready to run* out of the box. Welded mounting brackets included Size 30" x 12" x 18" Price $420.00 Sale Price $375.00
	DC Medium Lifter (for standard props) The DC Medium Lifter is the same mechanism as our heavy lifter, but engineered to animate lighter props (up to 30-40 lbs safely) from a starting point of 12" up to 34" (22" of travel). This lifter is designed as an "all around" lifter for haunt use, and can be used in a wide range of applications. The lifter lifts up, and comes forward toward the viewer, so this is a perfect armature for use behind a bush, tombstone, or other faced item. Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings) Kit includes everything needed to operate and control and ships ready to run* out of the box. Welded mounting brackets included Size 28" x 18" x 10" Price $380.00 Sale Price $340.00
	DC Light Lifter (for lightweight props) The The DC Light Lifter was designed to animate simple props such as foam heads with masks, or upper body props that do not require alot of lifting force. The light lifter is engineered to operate a 20" travel from a starting point of 10" up to 30" (lifter platform height). The light lifter is smaller and a much simpler design then the other lifters which makes it a great introductory armature for first time users that have wanted to get into haunting with air, but did not require large heavy duty mechanisms. Its simplistic design allows a lower price, while still achieving the strength, durability, and ease of use as the entire DC line of armatures. Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings) Kit includes everything needed to operate and control and ships ready to run* out of the box. Commonly used behind tombstones or similar objects with smaller light weight (up to 25lbs) props. Includes mounting holes in base for easy mounting. Size 18" x 12" x 10" Price $295.00 Sale Price $255.00
	DC Torso Erector The DC torso lifter is a professional built erector that was built to accommodate the common "bucky" Skeleton and give life(movement) to a once static prop. The erector bolts safely around the spine of the skeleton, and erects a bucky from a laying to sitting up position (approximately 90 degrees). Perfect for use in coffins or mounted to the ground. Lifter must be bolted or staked into onto a solid surface to ensure the armature and prop remain in its desired location. Welded mounting tabs included. Due to the fragile nature of the "Bucky" skeletons, DC advises that the skeleton (specifically the arms) be corpsed using latex and cheese cloth to adhere the body together. Corpsing will greatly improve the strength and life span of the skeleton. Works best with arms in static position, such as attached to chest and will prevent flailing arms and possible injury. Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings). Kit includes everything needed to operate and control and ships ready to run* out of the box. Also includes a "stopper" brace to prevent un-desired strain on the cylinder. Bucky torso not included, but available. Approximate Size 20" x 10" x 6" Price $345.00 Sale Price $310
	DC Torso Erector w/ Arm Extension The DC torso erector with arm extensions is the same mechanism as the Torso Erector, but with an additional armature added to lift the arms from a resting position on the sides of the rib cage, to an outstretched reach in upwards (triggered) position. Due to the fragile nature of the "Bucky" skeletons, DC advises that the skeleton (specifically the arms) be corpsed using latex and cheese cloth to adhere to the arm bars. Corpsing will greatly improve the strength and life span of the skeleton. Arms are adjustable at the elbows. Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings). Kit includes everything needed to operate and control and ships ready to run* out of the box. Also includes a "stopper" brace to prevent un-desired strain on the cylinder. Approximate Size 20" x 16" x 8" Price $399.00 Sale Price $350
	DC Barrel Lifter The Barrel lifter is a modified lifter similar to our trash can and wall mount lifters, but designed for use in a standard 55 gallon steel drum. The lifter utilizes the barrels strength as its main mounting surface and utilizes this support to minimize room within the barrel, in turn allowing larger props to fit within the tight space. Best of all it can be used (and was designed specifically for) use under water. The lifter includes two welded mounting brackets that connect into the barrels wall and approximately 40' of tubing to route the valve far away from the barrel. This setup includes a 24V valve setup with 110V transformer, to minimize any risk of shock if used in conjunction with water. However the wall mount transformer must be placed away from and mounted securely to a wall, away from areas that may come in contact with water. Lifter provides 24" of vertical movement measured from the top of the mounting platform (designed to completely submerge a full bucky torso). Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings). Kit includes everything needed to operate and control and ships ready to run* out of the box. Size 24" x 16" x 6" Price $365.00 Sale Price $310
	DC Mini Air Cannon Similar to other manufacturers cannons, but at a fraction of the price, the DC mini air cannon delivers a large blast of air that is guaranteed to startle without blowing out your viewers eardrums. To use this mechanism, simply mount the bracket to a stable wall, apply power to the valve, attach an air source (ie your air compressor line, not included), allow the tank to fill (60-80PSI recommended), push the trigger button and BANG!!!!!!!! Out fires half a gallon of compressed air in less then a half second. The DC Cannon also has the option of being fully automated with an AM1 realtime controller which includes an infrared sensor and easy to program sequence. For this automated version, choose "Automated Air Cannon" button below. Automated version replaces the hand held trigger with a sensor, but a hand held trigger is available upon request for an additional charge. Automation should only be used when small children ARE NOT going to be present. No mandatory re-fill is required between firing with this version. ONLY FIRE CANNON TOWARDS VIEWERS FEET. Constructed using only professional parts, the cannon includes a 1/2 gallon air tank with clip on mounting brackets, High flow dump valve, hand held trigger and 12v electrical connections. Price $220.00 Sale Price $195 Automated version (includes controller w/ PIR) $335.00 Sale Price $299
	DC Air Cannon Similar to other manufacturers cannons, but at a fraction of the price, the DC air cannon delivers a huge blast of air that is guaranteed to startle. To use this mechanism, simply mount the cannon to a stable surface, apply power to the valve, attach an air source (not included), allow the tank to fill (60-80PSI recommended), push the trigger button and BANG!!!!!!!! Out fires gallons of compressed air in less then two seconds. The DC Cannon also has the option of being fully automated with an AM1 realtime controller which includes an infrared sensor and easy to program sequence. For this automated version, choose "Automated Air Cannon" button below. Automated version replaces the hand held trigger with a sensor, but a hand held trigger is available upon request for an additional charge. Two minute re-fill is mandatory between firing. Automation should only be used when small children ARE NOT going to be present. ONLY FIRE CANNON TOWARDS VIEWERS FEET. Constructed using only professional parts, the cannon includes a 5 gallon air tank with welded mounting brackets, High flow dump valve, resonator, hand held trigger and 12v electrical connections. Price $325.00 Sale Price $295 Automated version (includes controller w/ PIR) $435.00 Sale Price $390
	DC Trash Can Lifter The DC Trash can lifter is similar to our medium duty lifter, but designed to fit into standard sized trash cans. The base is designed to fit in between the formed base of the trash can, while maximizing floor space for stability and mounting options. The lifter bars fit within in the circumference of the trash can throughout all movement while the base removes all strain from the walls of the trash can. The tight confinements of a trash can were used during design of this mechanism, and the lifter will provide the most usable space of any mechanism on the market (or design out there). DC recommends mounting the lifter through the can into the ground, but if that is not an option, adding weights to the platform base will also keep the mechanism in place. Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings). Kit includes everything needed to operate and control and ships ready to run* out of the box. Size 22" x 10" x 12" Price $385.00 Sale Price $350
	DC Vertical Mover The DC Vertical Mover was designed for use in areas that only straight up and down movement can be applied (ie. no 4 bar lifter mechanisms). The DC vertical mover is a vertical slide platform that provides 14" of vertical movement, while removing all side to side movement and stress that is placed on a cylinder rod during movement. The mechanism houses a 14" cylinder between two solid steel guides that provide an extremely smooth movement with a very strong and stable mounting surface(the travel on this mechanism can be customized up to 48" per clients request for an additional charge). Commonly used inside wine barrels, or to lift partial coffins vertically. Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings). Kit includes everything needed to operate and control and ships ready to run* out of the box. Size 32" x 8" x 12" Price $440.00 Sale Price $380
	DC Horizontal Mover The DC Horizontal Mover extends most light/mid weight props (up to 25lbs) horizontally 12" at a slight angle to provide movement to ground moving props such as spiders, ankle grabbing corpses, or similar props. Originally designed to be used in holes or other low light areas where the prop comes towards your viewers. Built using 14 Gauge tubular steel and professional pneumatics (110V standard valve included). Kit includes everything needed to operate and control and ships ready to run out of the box. This extender can be modified to extend up to 24" for an additional charge Size 26" x 12" x 10" Price $360.00 Sale Price $320 Never use this mover in close proximity to viewers.
	DC Spitter Mechanism The DC Spitter mechanism is the mechanical device that allows for a animatronic to spray water at viewers when triggered. Simply run mechanism upwards through the props body, place nozzle into the mouth, and submerge the feeder tube (purple) into water (1-5 gallon recommended, but works great in a barrel prop where the reservoir is part of the prop). When triggered, water will siphon from reservoir, and a fine mist of water will shoot between 6-12' out of the mechanism tip. Kit includes 12V valve, back flow prevention valve, 10' tubing, and feeder system. (Skull not included) Price $130.00 Sale Price $110
	DC Ankle Tickler The DC ankle tickler features six 12" silicon whips that erraticaly whip around your viewers feet. Controlled via hand held trigger or with an animation controller (controller is user programmable, extremly easy!). To opperate, simply secure mechanism behind or on wall (you will need to drill 6 3/8" holes thru wall if mechanism is located behind wall), apply pressure to main air inlet (runs off 60-120 PSI) and plug in power supply. To actuate the manual ankle tickler, simply push hand held trigger button and whips will begin to whip around erratically. Kit includes 24V valve, 6' supply hose, six 14" whips, hand held controller with 12' of wire and air supply hose w/ 1/4" NPT male fitting. Price $220.00 Sale Price $195
	DC Drop Panel Designed to bolt into an existing column (inside dimension of 20" x 50" required) the DC Drop Panel mechanism provides 18" of panel drop for a quick and extremely effective startle. The drop panel includes welded frame, 3/4" wood panel, 18" cylinder, quick exhaust valve for rapid descent, and all pneumatic tubing, fittings a 110V valve with standard plug, and 1 flow control for control over lift speed. Can be modified to allow for larger panel and more drop distance. Please email DC for a quote. Drop panel is easy to automate using an Animation Maestro 1 or if you want to add an additional startle (we suggest the mini air cannon) an Animation Maestro 2 will allow you to control both effects while integrating an infrared sensor to automate the startles. Basic: Price $440.00 (ships ups oversized) Sale Price $395
	Barrel Spitter The barrel spitter incorporates a standard 55gal drum, bucky skeleton, and a DC barrel lifter and spitter mechanism that lifts a skeletal torso 22" out of the barrel and is designed for constant submersion. The basic kit includes barrel with base mount airline fittings (hidden to all viewers), all pneumatic components, semi corpsed skeletal torso with welded steel sub frame (posable), and an animation maestro 2 controller for seperate control of lift movement and spit (includes an infrared motion sensor). Program is setup to detect movement, delay 5 seconds, before ejecting the skeleton upwards and towards your viewers while spitting a heavy mist of water. Skeleton will lower and rise a couple seconds later for one final spray before resetting with a programmed 40 second delay between fires. Price $900 Sale Price $800 Ships UPS oversized standard rate Corpsed $1150 Sale Price $1000 Please allow 4 weeks build time before shipping.
	The Bushwacker The Bushwacker is a multi movement prop that hides behind a set of silk bushes before lunging forward spitting a mist of water at its viewers. (Silk plants not included). The Bushwacker shakes the bushes violently before lunging forward and upwards. Bushwacker is controlled via a pre-programmed controller with infrared sensor for triggering movement. Price includes all mechanics, lightly corpsed skeleton, spitting mechanism, and automated controller with pre programmed sequence and infrared sensor. Price $950 Sale Price $850 Corpsed $1150 Sale Price $1000 Please allow 4 weeks build time before shipping.
	Spitting Spider Extender The spitting spider is a custom scissor mechanism that launches a 18" latex spider 4' towards its viewers. In addition, it sprays a a mist of water up to 6' (at 120PSI). The spiders unique design allows for the spider to start at a low resting height, but rises throughout its travel to approximately 3.5' with the mouth of the spider pointing slightly upwards to spray your viewers at chest level. Price includes all mechanics, posable 18" latex spider, spitting mechanism, and automated dual output controller with infrared sensor. Price $1050 Sale Price $945
	Spitting Spider Pop-up The spitting spider is a custom light lifter that launches a 24" latex spider 24" up and slightly towards its viewers. In addition, it sprays a a mist of water up to 6' (at 120PSI). The spiders unique design allows for the spider to start at a low resting height, but rises throughout its travel with the mouth of the spider pointing slightly upwards to spray your viewers at chest level. Price includes all mechanics, posable 18" latex spider, spitting mechanism, and hand held push button controller (or choose automated version with infrared controller. Price $450 Sale Price $385 Automated version: Price $520 Sale Price $435
	DC Half Torso Kicker The DC half torso kicker is a professionally built steel framed armature for use in a upside down hanging body/torso animation. The legs include a removable ankle bar to allow the character to be dressed. Includes 1 cylinder, 1 large valve, all necessary fittings. Requires an air compressor with a steady 40-60PSI rating. Also includes a heavy duty chain with removable linkage, and ceiling mounting plate. A realtime controller such as the Animation maestro 1 will allow you to get extremely life/deathlike movement as well as be triggered via a infrared sensor. Check out our prop control section for more information. Mechanism can also be used laying on a table, for an even weirder effect Size 42" x 12" x 6" Price $400.00 Sale Price $360
	DC Half Torso Erratic Kicker The DC half torso erratic kicker is a professionally built steel framed armature for use in a upside down hanging body/torso animation. The legs include separate cylinders allowing this body frame to produce individual leg movements that are extremely life like and extremely erratic no other kicker on the market. Includes 2 cylinders, 1 valve, all necessary fittings. Requires an air compressor with a steady 40-60PSI rating. Also includes a heavy duty chain with removable linkage, and ceiling mounting plate. A realtime recording controller such as the Animation maestro 1 will allow you to get extremely life/deathlike movement as well as be triggered via a infrared sensor. Check out our prop control section for more information. Mechanism can also be used laying on a table, for an even weirder effect This armature also includes an ankle bar, that allows for the same movement as our standard kicker. We recommend using this armature with a flexable body form with no internal armature from Ghost Ride Productions. Size 42" x 12" x 6" Price $475.00 Sale Price $425
	DC Hangman Kicker The DC Hangman kicker is a professionally built steel framed armature for use a hanging animation. The legs include a removable ankle bar to allow the character to be dressed. Includes 1 cylinder, 1 valve, all necessary fittings. Requires an air compressor with a steady 40-60PSI rating. Also includes a heavy duty chain with removable linkage, and ceiling mounting plate. A realtime recording controller such as the Animation maestro 1 will allow you to get extremely life/deathlike movement as well as be triggered via a infrared sensor. Check out our prop control section for more information. Mechanism can also be used laying on a table, for an even weirder effect We recommend using this armature with a flexable body form with no internal armature from Ghost Ride Productions. Size 42" x 12" x 6" Price $425.00 Sale Price $382
	DC Hangman Erratic Kicker The DC Hangman erratic kicker is a professionally built steel framed armature for use in a hanging animation. The legs include separate cylinders allowing this body frame to produce individual leg movements that are extremely life like and extremely erratic- no other kicker on the market provides these movements. Includes 3 cylinders, 2 valves, all necessary fittings. Requires an air compressor with a steady 40-60PSI rating. Also includes a heavy duty chain with removable linkage, and ceiling mounting plate. A realtime controller such as the Animation maestro 2 will allow you to get extremely life/deathlike movement as well as be triggered via a infrared sensor. Check out our prop control section for more information. Mechanism can also be used laying on a table, for an even weirder effect We recommend using this armature with a flexable body form with no internal armature from Ghost Ride Productions. Size 42" x 12" x 6" (ships UPS oversized) Price $525.00 Sale Price $472
	DC Electric Chair Armature The DC electric chair armature was designed to be used inside a foam body form to provide violent movement that when used with an automated controller (programmed with rapid program) to simulate an electrocution. Includes 1 large cylinder, high flow valve, all necessary fittings. Requires an air compressor with a steady 80-120PSI rating. Also includes a heavy duty chain with removable linkage at waist, and ankles. A realtime controller such as the Animation maestro 1 will allow you to get extremely life/deathlike movement as well as be triggered via a infrared sensor. Check out our prop control section for more information. We recommend using this armature with a flexable body form with no internal armature from Ghost Ride Productions. Size 42" x 12" x 6" (ships UPS oversized) Price $440.00 Sale Price $380
	Animated Mourner The animated mourner is an elaborate ORIGINAL DC multi-movement animatronic character design that features the followign movements (in order): Digital audio player plays a creepy cry, character extends 24" towards your viewers, spins 180 degrees, stands up from seated height of 4' to standing 6.5' while screaming, yells "boo" while thrusting her arms outwards (A spitter and animated head can also be added for an additional charge) before retracting to her original placement. Movements all synced with audio. Price $4200 Sale Price $3850 Ships via Freight with spitter mechanism: $4300 Sale Price $3900 with animated DC skull; includes programming of synced audio (client supplied) $4750 Sale Price $4100 * Please allow 4-6 weeks build time before shipping.
	Animated Talking Skull The only pneumatic driven skull on the market today. The DC animated skull is cast out of heavy duty polyurethane and features a moving jaw and head tilt/lift (90 degree head turn also avail). This skull is perfect for your animated host or que line characters and can abuse far better then servos. Price w/o controller $450 Sale Price $400 Same as above, Add head turn $580 Sale Price $500 Price w/ controller, digital audio & programming to client supplied audio (40 sec program length included in price) $950 Sale Price $800
	Skeletal Organist (Motor Driven) The Skeletal Organist is another ORIGINAL DC Design Studio prop that sits on a steel framed/plywood covered bench (included), playing a organ/piano with an eerie un-dead movement. This version is motor driven and begins when power (110V) is applied. A controller and audio can be added to appear as though the organist is coming to life. Skeleton is lightly corpsed and antiqued. - Ships via freight Price w/o controller $2400 Sale Price $2000 Price with controller, infrared sensor, and digital audio $2800 Sale Price $2400 Pneumatic Skeletal Organist (air powered) Similar to above, but driven via 6 pneumatic cylinders/valves and digitally controlled to sync with audio. The movements (head turn, arm out X2, elbows X2, and body tilt create a very realistic and creepy animation. Pre-Programmed with funeral march audio, but other audio combinations avail upon request (may be subject to additional programming charges). Includes digital sound player, controller, all pneumatics and infrared sensor. Price $3500 (ships freight) Sale Price $3100
	Rocking Shovel A simple animation for graveyard eye candy. The shovels rock back and forth slowly with all motors and mechanics hidden within a fiberglass rock. Requires 110V power Price $280.00 Sale Price $245
	Thrashing Corpse The Thrashing corpse is an animated figure that appears as a static corpse peering thru a gate. When activated (via infrared sensor) the corpse opens his mouth, turns his head erratically and begins thrashing back and forth as to escape from his imprisonment. Prop is attached to a heavy steel base and includes our animated skull which for an additional charge we can add audio and sync its voice to your soundtrack (client supplied). Figure stands at 5.5' and requires air (80PSI) and 110V power for the controller. Ships via freight. Standard Price $3000.00 Sale Price $2500.00 Thrashing Corpse Extreme (includes digital audio & voice sync) Price $3500.00 Sale Price $2900.00
	Virgil "Out of the Ether" From the depths of Hell let Virgil, master of the ethermuse, lead you on a sonic journey into and out of the abyss. Eight ambient tracks take you on a 53 minute journey into the darkness of the pit and "Out of the Ether". Price $~~12.00~~ Sale Price $10.00
	Virgil "Dark Hollow" A sonic journey into the shadows of your mind', "Dark Hollow" contains 11 tracks that explore many different ranges that vary from dark and ambient to spooky and orchestral and everything in-between, invoking a wide range of atmos-"fears" for use in both your home and haunted attraction. Price $~~12.00~~ Sale Price $10.00
	RustyKnife Productions Organum Effectus Rustyknife's "Organum Effectus" is a combination of the Grim Organworks of "Organum" and creepy, ominous sound effects. The sounds have been carefully selected to match the mood of each piece of music. An instant gothic soundscape. A great background CD for a party or "Haunted Organist" display! Price $~~12.00~~ Sale Price $10.00
	Midnight Syndicate Gates of Dilirium Midnight Syndicates 3rd album. A winding cobblestone road meanders its way deep into the thick forest blanketing the hillside. Up ahead, you can make out several spires rising above the treetops, signalling your arrival at Haverghast Asylum - your new home. As your horse-drawn carriage comes to a stop before its imposing front gates, you catch a glimpse of something scrawled across one of the otherwise-pristine windows high above you. "Turn Back" it says. Just then, a guard emerges from beyond the gate to escort you inside. Haverghast is said to be a place of healing for wayward minds, but there have been whispers of other things as well. Things that are too terrible to speak of...things that, if true, could make your nights here rather...unpleasant... Price $~~13.00~~ Sale Price $10.00
	Midnight Syndicate Realm of Shadows Far beneath the shadow of the Dark Tower and beyond a clearing known as Raven's Hollow lie the ruins of a village. No one is certain what arose from the deep the fateful night that the village was laid to waste, but travelers now report shadows moving through the deserted streets and a solitary light shining from the old town square. Dare to discover the curse that befell this forsaken place as you venture forth into the "Realm of Shadows." Out of Print - DC has copies in stock Price $~~13.00~~ Sale Price $10.00
	Midnight Syndicate Born of the Night The Dark Tower stands high upon a rocky outcrop, gazing down upon the landscape below with cold, merciless eyes. For as long as anyone can remember, its forbidden halls have been known only to the nightmarish denizens that call it home, as none that have ventured near it have ever returned to tell of their journey. One thing is certain - the Dark Tower is a place best left alone. Whatever horrible secrets it keeps are not meant for the eyes of the living . . . Out of Print - DC has copies in stock Price $~~13.00~~ Sale Price $10.00

Visitors Since August 2003