
|
This picture displays a common 24v DC Valve Setup which
includes a 24V DC 4 way valve, power supply, push in fittings, tubing,
and flow controls (where applicable).
To use any of the the armatures below simply follow these four steps:
- Secure your prop to the mounting plate.
- Bolt mechanism to a sturdy mounting surface
- Add air (connect female threaded compressor
fitting, then insert into compressor coupler)
- Connect electrical and trigger! (manual
or automated)
All mechanisms designed to operate at 40-60PSI, while
being rated up to 125PSI
* Ready to run requires an air compressor with constant 60PSI flow, and
a 1/4" npt female airline fitting (from compressor hose to valve feed
line) which are not included.
**Valves and Cylinders may be varied depending on price and availability.
|